Best Pediatric Pulse Oximeter: Infant & Child Options Compared (2026)
Updated November 2026
How to choose the right pediatric pulse oximeter for spot checks, overnight monitoring, and infant/pediatric sensor selection.
When selecting the best pediatric pulse oximeter, you’re not just choosing a device that displays SpO₂, you’re choosing a monitor that can deliver a reliable reading when a child is anxious, squirming, or asleep.
Because children have smaller anatomy, higher motion, and lower tolerance for discomfort, pediatric readings can be harder to capture consistently.
This guide is written for professionals selecting a pediatric pulse oximeter for pediatric care settings and monitoring programs. It compares common device types and highlights pediatric-focused options from CMI Health alongside other products professionals may consider.
Quick Picks: PC-66L with Pediatric Sensor vs PC-66L with Infant Sensor
If you already know the patient’s age and size, these two PC-66L bundles cover most pediatric and infant needs. Both include an adult finger clip for spot checks, so one device can also be used for older patients.
- Children ages 4–12 (and/or 33–88 lbs): the PC-66L with Pediatric Sensor includes the Pediatric Silicone Sensor #75, a non-adhesive, soft rubber tip designed for extended readings and to stay in place overnight.
- Infants and toddlers under 25 lbs and up to 18 months: the PC-66L with Infant Sensor includes the Infant Foot Wrap Sensor #72, a soft, latex-free foot wrap designed for extended use, including while baby sleeps.
Shop the PC-66L with Pediatric Sensor →
Shop the PC-66L with Infant Sensor →
Compare CMI Pediatric and Infant Pulse Oximeter Options
The tables below compare CMI’s handheld oximeter bundles and the infant and pediatric sensors that pair with them. A dash (—) means the product page doesn’t state that detail.
Handheld oximeters and bundles
| Device / bundle | Sensors included | Spot check vs extended use (per product page) | Child sensor age / weight range | Listed price (Nov 13, 2026) |
|---|---|---|---|---|
| PC-66L with Pediatric Sensor | Pediatric Silicone Sensor #75; Adult Finger Clip Spot-Checking Sensor #09 | Pediatric sensor: extended readings, designed to stay in place overnight. Adult clip: spot checks. | Ages 4–12 and/or 33–88 lbs | $160.99 new; $119.99 open box |
| PC-66L with Infant Sensor | Infant Foot Wrap Sensor #72; Adult Finger Clip Spot-Checking Sensor #09 | Foot wrap: extended use, including while sleeping. Adult clip: spot checks. | Under 25 lbs and up to 18 months | $142.99 new; $119.99 open box |
| PC-66L (Standard) | Adult finger spot-checking sensor | Adult spot checks; infant and pediatric sensors sold separately | — | $124.99 new; $79.99 open box |
| CH-100 | Adult CH-100 Finger-Clip Sensor | — | — | $239.99 |
Infant and pediatric sensors
| Sensor (sold separately) | Works with | Sensor type | Spot check vs extended use (per product page) | Age / weight range | Listed price (Nov 13, 2026) |
|---|---|---|---|---|---|
| Infant Foot Wrap Sensor #72 | PC-66 only | Soft, latex-free foot wrap | Spot-checking and extended use | Under 25 lbs, up to 18 months | $39.99 |
| Pediatric Silicone Sensor #75 | PC-66 only | Non-adhesive soft rubber finger tip | Extended tracking | Ages 4–12 and/or 33–88 lbs | $39.99 |
| Pediatric Finger Clip Sensor #15 | PC-66 only | Finger clip | Multiple-use spot-checking | Ages 4–12 and/or 33–88 lbs | $39.99 |
| Infant Silicone Wrap Sensor | CH-100 only | Silicone wrap | Continuous or spot-check | Under 18 months and/or 25 lbs or less | $39.99 |
| Infant Foot Wrap Sensor | CH-100 only | Foot wrap | Continuous or spot-check | Under 18 months and/or 25 lbs or less | $34.99 |
| Pediatric Silicone Sensor | CH-100 only | Silicone sensor | Continuous or intermittent | Ages 3–12 and/or 55–110 lbs | $41.99 |
| Pediatric Finger-Clip Sensor | CH-100 only | Finger clip | Routine or spot-check | Ages 3–12 and/or 55–110 lbs | $34.99 |
Prices are as listed on cmihealth.com on November 13, 2026 and may change. Sensors are model-specific: PC-66 sensors work only with PC-66 handheld oximeters, and CH-100 sensors work only with the CH-100.
How We Chose
This comparison covers CMI Health products only. We grouped them by the two questions that matter most in pediatric monitoring: how big the patient is, and whether you need quick spot checks or longer readings. Every spec in the tables comes from the product page as of November 2026, and we left a dash wherever a page doesn’t say. We didn’t test devices side by side or rank them on accuracy.
Spot Checks vs Overnight Monitoring (Choosing the Right Pediatric Pulse Oximeter)
Most pediatric monitoring falls into two use cases:
A) Spot checks (clinic / school / office)
Priorities:
- fast reading
- repeatable results
- pediatric fit
- simple workflow
B) Overnight or longer monitoring (trend-based)
Priorities:
- comfort for extended wear
- secure placement during motion/sleep
- continuous monitoring capability (with compatible sensor/configuration)
Monitoring Infants: Why Wrap-Style Sensors Are Often Preferred
After deciding between spot checks and longer monitoring, the next priority is choosing sensor options that fit pediatric patients, especially infants and younger children.
In pediatric monitoring programs, infant pulse oximeters (sometimes referred to as baby pulse oximeters) are needed for patients from birth to about twelve months old. CMI’s infant wrap sensors are listed for babies up to 18 months and 25 lbs or less, which covers many young toddlers as well.
Clinically, the deciding factor is usually secure placement and comfort. Infants may not tolerate fingertip placement reliably, so wrap-style sensors are often preferred—including options like CMI’s infant foot wrap sensor and infant silicone wrap sensor.
Pediatric Pulse Oximeter Options Professionals May Consider
In pediatric settings, professionals may evaluate or be asked about a range of pediatric pulse oximeter options, including configurable clinical systems and primarily consumer monitoring products.
The chart below groups several commonly discussed brands (including CMI Health, Wellue, Owlet, Holfenry, and Healthtree) by product category to clarify how they’re typically used.

CMI’s Advantage in Pediatric Pulse Oximeter Selection: Sensor Ecosystems (CH-100 + PC-66)
CMI’s strength in pediatrics is not just the clinical-grade monitor platforms, it’s the ability to build a pediatric monitoring setup using infant and pediatric sensor options that match real patient needs.
This matters most when programs need:
- infant sensor placement that stays secure during motion/sleep
- pediatric sizing flexibility across age groups
- consistency across multiple patients
CH-100 Sensor Options (Infant + Pediatric)

Infant sensors (2 options):
Pediatric sensors:
PC-66 Series Sensor Options (Infant + Pediatric)
Prefer a ready-made bundle? The PC-66L with Pediatric Sensor and PC-66L with Infant Sensor each include one of these sensors plus an adult finger clip.

Infant sensor:
Pediatric sensors:
CMI Pediatric Sensor + Platform Comparison
This chart summarizes how the two CMI pulse oximeter platforms support infant and pediatric monitoring across different care needs.

Steps in Choosing the Best Pediatric Pulse Oximeter
Step 1 — Confirm the monitoring need
Are you selecting for:
- clinic/school spot checks
- longer monitoring windows and trend review
- infant + pediatric coverage within one program
Step 2 — Choose the right device category
- Fingertip spot-check devices: fast readings, minimal setup
- Wearables: trend-based monitoring, often caregiver/app-driven
- Handheld + sensor ecosystems: best fit for infant wrap sensor and pediatric sensor flexibility
Step 3 — Choose sensor style and sizing early
In pediatrics, sensor choice can strongly influence:
- reading stability
- comfort tolerance
- success during motion and sleep
Proper fit and placement play a big role in getting reliable readings. If you’re unsure how to use your device once you have it, our step-by-step guide on how to use an infant pulse oximeter walks through everything from placement to interpreting results.
Conclusion
The best pediatric pulse oximeter is the one that delivers reliable readings in everyday pediatric conditions and supports your monitoring needs in practice.
For pediatric programs that need flexibility across patient sizes and monitoring scenarios, CMI offers pediatric-focused options with infant and pediatric sensor configurations designed to support real-world care.
For children ages 4–12, start with the PC-66L with Pediatric Sensor. For infants up to 18 months and under 25 lbs, start with the PC-66L with Infant Sensor.
Explore pediatric monitoring options from CMI Health.
Frequently Asked Questions
Finger clip or wrap sensor: which is better for a child?
It depends on the child’s size and how long you need readings. On CMI’s PC-66 line, the Pediatric Finger Clip Sensor #15 is designed for multiple-use spot-checking, while the Pediatric Silicone Sensor #75 has a non-adhesive, soft rubber tip meant to stay in place during extended tracking. Both are listed for most children ages 4–12 and/or 33–88 lbs. For babies, the Infant Foot Wrap Sensor #72 is designed for both spot-checking and extended use in infants under 25 lbs and up to 18 months.
Can a child use an adult pulse oximeter?
Fit matters. Proper fit and placement play a big role in getting reliable readings, and an adult finger clip is sized for adults. The FDA also notes that factors such as poor circulation, skin thickness and skin temperature can affect pulse oximeter accuracy (FDA: Pulse Oximeters). For a child, choose a pediatric or infant sensor listed for their age and weight, and follow your clinician’s guidance. CMI’s PC-66L bundles include both: an adult finger clip for spot checks and a sensor sized for children or infants.
Which PC-66L bundle should I choose?
Choose the PC-66L with Pediatric Sensor for most children ages 4–12 and/or 33–88 lbs, and the PC-66L with Infant Sensor for infants and toddlers under 25 lbs and up to 18 months. Both include the Adult Finger Clip Spot-Checking Sensor #09.
Can I add a different sensor later?
Yes. Infant and pediatric sensors are sold separately, but they are model-specific: PC-66 sensors work only with PC-66 handheld oximeters, and CH-100 sensors work only with the CH-100.
Leave a comment